Wind Speed Sensor / Anemometer
The wind speed sensor adopts the traditional three wind cup structure, the wind cup is made of ABS material, and has high strength and small starting wind speed. The cup body built-in signal processing unit can output the corresponding wind speed signal according to the user demand.
With the function of the relay wind sensor can directly switch the other devices according to the wind speed value, but also can output 485 signal, pulse and voltage signal at the same time.
Description
Specification
Range：0～45m/s, 0～70m/s
Accuracy：±(0.3+0.03V) m/s
Resolution：0.1m/s
Starting wind speed：≤0.5m/s
Cable：Standard: 2.5m
Load capacity：Current output impedance≤600Ω, voltage output impedance≥1KΩ
Operating environment：Temperature -20℃～60℃，humidity≤100%RH, No condensation
Defend grade：IP54
Cable grade：300V, 80℃
Weight：130g
Structure Size
-
- Wind Speed Sensor / Anemometer
-
- Wind Speed Sensor / Anemometer
Selection Table
| Model No. | Power | Output | Measuring range |
|---|---|---|---|
| ET-FS | 12V, 24V | 4-20mA | Standard 0-45m/s 4-20mA: 0-60m/s |
| 0-20mA | |||
| 5V, 12V, 24V | 0-5V | ||
| 1-5V | |||
| 0-2.5V | |||
| Pulse | 0-70m/s | ||
| Modbus RS232 | |||
| Modbus RS485 | |||
| Relay | 0-70m/s |
Related Products
If you are interested in the above products, please fill in the table below, we will contact you ASAP.