Integrated Wind Speed & Direction Sensor(C type)
The EG-FSFX-C integrated wind speed and direction sensor is a highly integrated product of wind speed and direction sensor. It is assembled with stainless steel precision machined parts for high strength and easy installation.
The wind speed part adopts the traditional three-wind cup structure, the wind cup adopts the imported ABS material, the strength is high, and the start is good; the precision signal processing unit can output various signals according to the user’s demand, the range is large, the linearity is good, the observation is convenient, stable and reliable.
The wind direction part is a professional meteorological instrument for measuring the horizontal wind direction of the wind. The inside uses a precise angle sensor and uses a low inertia wind vane to respond to the wind direction. When the wind direction changes, the tail shaft rotates the shaft to drive the sensor magnet, and the angle sensor senses the magnetic pole orientation change.
Therefore, the output of the electrical signal is changed, the linearity is good, the precision is high, the dead angle is not observed, the observation is convenient, and the stability is reliable.
Can be widely used in meteorology, oceans, environment, airports, ports, laboratories, industry and agriculture and transportation.
|Item||Specification (Wind speed)||Specification (Wind direction)|
|Starting wind speed||≤0.5m/s|
|Load capacity||Current output impedance≤600Ω, voltage output impedance≥1KΩ|
|Operating environment||Temperature -20℃～60℃，humidity≤100%RH, No condensation|
|Cable grade||300V, 80℃|
|Model No.||Power||Output||Measuring range|
|ET-FSFX||12V, 24V||4-20mA||Range 0-45m/s4-20mA: 0-60m/s 0-360℃|
|5V, 12V, 24V||0-5V|
|Modbus RS232||Range 0-70m/s 0-360℃|
If you are interested in the above products, please fill in the table below, we will contact you ASAP.