Photoelectric Solar Total Radiation Sensor

Photoelectric Solar Total Radiation Sensor

The photoelectric solar total radiation sensor can be used to measure the total solar radiation in the spectral range of 0.3-3 μm. If the inductive surface is measured to measure the reflected radiation, the shading ring can also measure the scattered radiation.

The core component of the sensor is a high-precision photosensitive element with good stability and high precision. At the same time, a quartz glass cover made of precision optical cold working is installed outside the sensing element to effectively prevent the influence of environmental factors on its performance.

  • High sensitivity
  • High precision
  • Wide applicability
  • Wide range
  • Design specification
  • Factory direct sales

Description

Specification

Measure spectral range:300-1000nm
Range:0-1500w/m2
Resolution:1W/m2
Sensitivity:7~14μV/W•m-2
Accuracy:±4W/ m2
Load resistance:RL ≤ 250Ω (current) , RL ≥ 1KΩ (voltage)
Response time:<5s
Cosine response:<±10% (when the sun angle is 10°)
Nonlinear:<±5%
Annual rate of change:<±5%
Operating environment:Temperature -40℃~85℃,humidity 0~ 100%RH
Housing matera:aluminum alloy
Cable:2.5m
Weight:420g

Structure Size

Selection Table

Model No. Power Output Measuring range
ET-JYZ 12V, 24V 4-20mA Range0-1500W/m2
0-20mA
12V, 24V 0-5V
5V, 12V, 24V 0-2.5V
5V, 12V, 24V Modbus RS232
Modbus RS485

Related Products

Solar Total Radiation Sensor / TBQ
SOLAR TOTAL RADIATION SENSOR / TBQ
Photoelectric Solar Total Radiation Sensor
PHOTOELECTRIC SOLAR TOTAL RADIATION SENSOR
Light Intensity Illumination Sensor
LIGHT INTENSITY ILLUMINATION SENSOR

If you are interested in the above products, please fill in the table below, we will contact you ASAP.

I accept marketing emails from Egen that I can opt out at any time.